Its getting close to tile installation at a construction site in Phoenix, Arizona. A modern Gender Neutral Restroom is being constructed within a single story office complex in Phoenix, Arizona. The exterior of the 1970’s building reflects beige stucco, dark roof rafters and terra cotta accent tile. This renovation will be a huge transformation from a dark and outdated restroom experience to something more forward looking.
Ceramic Tile Arranging
Restroom Wall Tile Design
Ubiquitous Mirror Wall Replaced
During the design phase of the remodel we figured the tenants will come and go along with their individual corporate branding color palettes. The Restroom could be an updated version of the 1970’s color vibe and stay neutral for the future.
Small Mirrors Keep Hand Wash Experience Abbreviated
The ubiquitous mirror wall is replaced with 2″ x 2″ mirror squares randomly placed among clay tiles. The tiles are named “Zela” in 2″ x 6″ beige and terra cotta from Emser Tile in Phoenix, Arizona. Hopefully the small mirrors will keep hand wash experience abbreviated in this forward looking shared space. See above “Restroom Wall Tile Design” for layout of the 2″x2″ mirrors shown as black squares in the field of tile above the sink counter.
Exterior Restroom Approach
1970’s Orange Tile Modern Translation
After calculating existing restroom requirements with the City of Phoenix Building Codes and today’s movement of All Gender Restroom we made a big change by combining 4 small rooms into one room. The new Restroom will have 4 separate rooms that are sealed floor to ceiling, doors with threshold seals, and separate HVAC intakes. Each room will have a full length mirror. There will be one new entry door for all to use. We went with MS362 Standard Medium Stile by Arcadia Inc. with a bronze frame to let in light and a nod to the past.
Restroom Back Wall in Construction
The 2″ x 6″ clay tile mixed with random small mirrors will only be on the one wall in back of the sinks (the black metal piece is the sink support). The new accent wall in the middle of the double loaded private stalls will be painted terra cotta another nod to the 1970’s orange tile from outside.
Efficiency is important in office Design, whether it’s improvements to an existing space or a new building. Swinging doors are typical, however in certain applications, a sliding door is allowable by code and can improve the plan. Should you use a Swinging doors or sliding doors in your design?
Swinging doors take up room to allow for them to open and close. Sliding doors are more compact. A swinging door will open up to a wall. Doors can open 180 degrees against a wall, but in a smaller office, there may not be room for this to occur. Remember to provide the necessary clearances around doors as described in the post “Clearance around a door”. In a space with millwork or cabinets, a swinging door in its open position will affect accessibility to millwork. Below are a few scenarios.
Office Design with 90 degree swinging door
Office design with 180 degree swinging door
ADA compliance affected. Room will require more room to meet door clearances.
Office design with sliding door
Space is more efficient allowing for a more functional space.
The sliding door is much more efficient. If located properly, it allows for additional wall space where the door would swing to place more furniture or more maneuverability within the space
In locations such as a breakroom, millwork or other elements may conflict with swinging doors. In the two examples below, one layout shows where a sliding door will improve the functionality of the space.
Breakroom with swinging vs sliding door
When is a sliding door allowed?
There are a few instances where sliding doors are allowed by code. The following are some examples based upon the 2018 IBC codes. check your local jurisdiction for current code adopted and their interpretation.
Per section 1010.1.2 Door Swing. – Egress doors shall be of the pivoted or side-hinged swinging type. Exceptions where this doesn’t apply:
Private garages, office areas, factory and storage areas with an occupant load of 10 or less.
Group I-3 occupancies used as a place of detention.
Critical or intensive Care patient rooms within suites or health care facilities.
Doors within or serving a single dwelling unit in Groups R-2 and R-3.
In other than Group H occupancies, revolving doors complying with Section 1010.4.1.
In other than group H occupancies, special purpose sliding, accordion or folding door assemblies complying with Section 1010.1.4.3. This pertains to specialty doors which are power operated etc. Example of this is in grocery stores. The doors typical have the ability to hinge during a emergency or when the power disrupts the operation of the door and remains in a closed position.
Power-operating doors in accordance with Section 1010.1.4.2.
Doors serving a bathroom within an individual sleeping unit in Group R-1.
In other Group H occupancies, manually operated horizontal doors are permitted in a means of egress from spaces with an occupant load of 10 or less.
Items in blue, exception 1 and 9 pertain to office spaces.
There are various solutions for sliding doors. Ensure the solution you select meets ADA requirements. Acoustical properties is another factor to consider when picking the type of sliding door. A typical barn door will not have acoustical properties as it doesn’t have a seal at the opening, so if this is a concern, do some research on the type of door system. There are numerous examples of acoustical sliding doors. One example that has acoustical properties is AD Systems.
Summary
When planning your next office, determine if sliding doors would be a solution to make your office design more efficient. Will it save space and make it more functional. Follow the examples above for reference but as always, refer to the local jurisdiction, the current ADA guidelines and a local professional to ensure your projects success.
What are the key ingredients to a good customer lounge?
Taking a break from the daily grind is important. Getting up from your chair, your cubicle or just out of your working environment and relaxing your eyes on a different environment other than the screen 1 foot away from your face is a great visual relax.
Now that your out from behind the computer, don’t let the lure of your smartphone take you to another screen merely inches from your face. If you can take a walk outside to decompress, then get some fresh air. If you’re in a neighborhood where taking a walk could be a health risk, the weather is not conducive or you just want to hang out with friends, hopefully your office has a comfortable customer lounge with nice amenities to decompress.
Elements to the Perfect Lounge
What are some nice elements to have in a customer lounge? Below is a wish list I put together for the ultimate break room to allow for someone to blow off some steam at work. But every project and client has their unique desires. Let me know what would be on your list.
My desired list of the perfect Lounge
Variety of seating arrangements. Places to recline, like a couch or large comfortable armchair. Small Tables with Bench seating or movable chairs for eating a snack or chatting with colleagues. Barstool with table for a quick bite, drink or chat.
Water and ice dispenser. Important to have clean cool refreshing water at your disposal. Ice for those who want a cool drink on a hot day.
Insta hot water dispenser. For those tea drinkers, having a readily available hot water to seep the tea bag is wonderful on a cold winter day.
Coffee. A Coffee dispenser, such as an automatic dispenser with a variety of options for mochas, lattes, hot chocolate, milk, sugar etc.
Refrigerator. This item would work if there were some rules established so there aren’t items left in there for scientific reasons. Establish a purge on Friday’s to keep things in order. It’s difficult enough to keep the refrigerator at home purged of expired items. But for those who want to bring their lunch or a snack, a nice feature to have.
Vending machine for important carbs or candy urges. A good bar of chocolate can help you through the day.
Ping pong or pool table. A quick game of nonsense can relieve stress of the brain grind.
Television. Try to put something light on, not CNN. Hearing about the latest stock dip or catastrophe isn’t the best way to relieve tension. How about some Joe Gatto with Impracticable Jokers or the Family Guy. Or in my case, car shows.
A box full of kittens. Kind of joking about that, but just imagine the stress they could release.
Customer Lounge Design
I just recently designed a customer lounge for a client. It was lacking a few of my wish list items but with the amount of available space we had to work with, the finishes and furnishing we were able to incorporate, it would be a place I definitely would enjoy hanging out in.
Currently working on another lounge, for a client’s corporate offices. Most likely have seating areas, water and coffee station, refrigerator for beverages, television etc. I’ll forgo presenting the idea of a box full of kittens though.
If conference room walls could talk. Designed to hold confidential conversation behind closed doors, these spaces must be adequately sized, comfortable and designed to allow people to connect. Flexibility is key in a facility where a presentation can be among a few to a large group.
The original facility for this fortune 500 technology company has several small conference rooms that were architecturally tired and able to handle up to about dozen occupants each at a time. The facility desired a large conference room that could easily hold up to 2+ dozen participants, technologically current and bring a bit of grandeur to a space which harked back to the 1980’s.
Solution
The solution was to combine two rooms into one large space. New finishes and furnishing were a must. A feature wall was incorporated (Interlam). One large continuous table (Nucraft Flow) was provided seating a total of 18. Additional benches (Steelcase Regard) around the perimeter allowed for additional seating. Floor finishes on a raised access floor included carpet tiles (Interface).
The accent wall was incorporated with color changing LED lighting allowing for a flexible mood of the space. If it is the dead of summer, a cool blue hue can achieve a cooling effect. On a cool wet winter day, a bit of red light can bring warmth. Wanting to focus on the bottom line, add a bit of green. If you looking to celebrate the holidays, add a bit of revolving color to add a little festive vibe.
If your conference room interior design is in need of an update, new finishes, furnishing and technology can bring your facility into the 21st century.
When finding an office Architecture in Arizona for rent within existing real estate, some research should be completed before signing a lease. Relying on a Realtor may not provide you with the full spectrum of issues regarding your office improvements. If you are making modifications and doing a tenant improvement, hiring an architect to do this initial research can inform you about potential modifications required by zoning and building code requirements. Even if you are looking at merely changing some finishes, other factors may affect the project scope.
Because each building and space is unique within office architecture, the architect will need to look at the original set of approved drawings and determine what changes may be required. Changes in occupancy or changes in code can affect the project.
Below is a Case study (example) of a past project. The client initially thought it was mainly going to upgrade some finishes and adding a few walls and doors. However once some research was done, the project scope grew.
Case Study
Project desired scope: Lease approximately 4,000 s.f. office space within existing building with minimal modifications. Upgrade to finishes as needed.
Office Architecture in Arizona – Existing building space available (shown in red)
Office Architecture in Arizona – Proposed space (shown in green)
Analysis
The area in green is the desired quantity of space the tenant desired and which sensibly works with the division of the space due to existing walls allowing for a future tenant to be located within the center suite. This allows for each tenant, to remain unaffected, to have accessibility to entry lobby and existing restrooms.
Issues to Address
Restrooms not accessible to proposed office space unless you travel through middle suite.
Verify if restrooms (# of fixtures or toilets) meets current codes.
Potential issue with exiting. # of exits and travel distance to exits will need to be analyzed.
Determine if mechanical system zones (area the mech unit serve) is not affected by proposed leasable space.
Determine if electrical systems are distributed properly for a division of the space into 2 separate suites.
Verify number of parking spaces required/available affected by the proposed modification.
Analysis
It was determined that the existing building, constructed about 25 years ago, was initially designed as a product showroom, not offices. It was initially established as an Occupancy A (Assmebly) Proposed use of the new tenant was to be Occupancy B (Office). Based upon our code analysis, it was determined it had an affect on conflict 2 or quantity of toilets as explained below.
Conflict 1 – Restroom not accessible to space. A corridor was added to allow for access to the existing restrooms while adding a second exit from the space.
Conflict 2 – Verify restrooms meet code. Because Assembly occupancies do not require as many plumbing fixtures than Office space per occupant, the existing quantity of restrooms were adequate in the original use. With the change of occupancy to ‘B’ Office, the # of plumbing fixtures was not adequate. Therefore, one additional toilet stall was added to satisfy codes. (see calculations below). To minimize affecting the original restroom (not affecting its use by existing tenant and affecting existing finishes), it was decided that a 1 person restroom would satisfy the requirement of an additional toilet fixture. This was not a desired addition to scope because of the additional construction cost, but solely to satisfy the building code requirements.
Conflict 3 – Potential issue with existing? The office space as proposed met all exiting requirements. Quantity of occupants did not exceed the number to trigger additional exits. However, because of the accessibility to the restrooms, a second exit was provided.
Conflict 4– Determine if mechanical system zones need modifications. Because of the original layout, the mechanical zones were not exactly divided into the zones that were established by the new wall creating the future tenant space. Therefore, ductwork modifications and a new mechanical unit was required to allow for the mechanical systems to function properly. This was an unknown addition to the project that the real estate agent would not be able to forsee.
Conflict 5 – Determine if electrical systems are distributed properly.It was determined, not to our surprise, that the electrical systems required separation of power to the 2 suites created. In reality, it could have remained more or less the same but by isolating the power, it allows for the building owner to clearly understand how much power each individual suite utilizes.
Conflict 6 –Is the number of parking spaces required/available affected? Fortunately because the occupant load from Assembly to Office reduced the number of occupants within the space, the number of existing parking spaces were more than adequate. No changes required.
Office Layout
Additional code analysis information
Summary
When finding an office space for rent, even in a simple remodel as shown in the case study, you can see how important research of issues are prior to signing a lease. The analysis will provide you with a more clear understanding of the possible scope due to modifications to the existing building systems, required updates due to current building codes and occupancy changes.
If you are considering an office architecture in the near future, hiring an architect can help you make good choices.
As buildings age, there are many factors which may spark the need for an office improvement. If you have a feeling that the space could be better utilized or that the finishes create a underwhelming environment, it may be time to update your offices to create a more productive and exciting place to work. If needed a finance for office improvements you can check this site https://www.onepayday.com/.
office Lounge
I recently met with a client and below are some recurring themes which make a company want to improve their work environments.
Our office feels outdated
We could better utilize our space
First impressions from the lobby is lackluster
The used office furniture we acquired when we first started our company is not an efficient use of space, aesthetically tired and in need of replacement
As our workforce ages, we want to lure millennials into our offices and retain our current millennials
Outdated system furniture
unmatched office furniture with various chair styles within one room
Desire Modern office interior
Unmatched interior from multiple project throughout the years
Lobby needs a refresh
Restrooms need a refresh
Utilizing an architect to orchestrate the design should be your first stop. They can put together the necessary design team of engineers and contractor to ensure a successful project. For example, if structural changes are required or building systems such as Mechanical, plumbing or electrical need to be altered, the architect can find the right team. If your in need of a contractor, the architect can suggest the right type of contractor for the project. The best approach is when client, architect and contractor work together as a team.
Before remodel
Commercial office building – After remodel
During Construction, especially improvements to an existing buildings, opening up walls, ceilings and floors may uncover unusual construction, items concealed from prior projects or even failure in construction systems. Abandoned sinks, ductwork and wiring is common. Even faulty floor slabs or failed plumbing can be uncovered. Fire rated wall conditions may be altered and not satisfying the code or even worse, creating a unsafe environment. Restrooms may need new plumbing, not just the sink or toilet, but what is behind the wall. Over time, the piping may have become corroded.
During construction, quick logical decisions by the design team and contractor ensure that the project is completed efficiently and correctly, satisfying all current codes and creating a safe environment.
